  |
|
  |
- 良好的測試性能和線性度
- 誤差：±0,5 %... ±1,0 %
- 壓差小
- 低響應時間(10... 40 ms)
- 外型小、重量輕
- 最大工作溫度+120 °C
- 工作壓力最大35,0...40,0 MPa
|
流量計優點 |
- 受溫漂小的測試性能和線性度
- 誤差：±0,4 % ... ±0,5 %
- 壓差小
- 粘度范圍：最大5000 mm2/s (cSt)
- 一個型號的測量范圍寬
- 低響應時間(10... 40 ms)
- 自由選擇安裝方向和連接器
- 體積測量方式
- 工作溫度-20 °C... +120 °C
- 工作壓力最大40,0 ... 63,0 MPa
|
- 1-10L/min 最大能測量的粘度：60 cSt.
- 其它流量能測粘度為：270 mm2/s (cSt)
|
流量計注意！ |
- 對污染度要求嚴格
- 相對渦輪流量計而言很重
- 最小測量粘度4 mm2/s (cSt)
|
- 1,0 ... 10 l/min
- 2,0 ... 75 l/min
- 9,0 ... 300 l/min
- 16,0 ... 600 l/min
|
流量測量范圍 |
- 0,005 ... 1 l/min
- 0,05 ... 5 l/min
- 0,2 ... 30 l/min
- 0,7 ... 70 l/min
- 3,0 ... 300 l/min
|
- Max. 60 cSt (1,0 ... 10 / Typ RE 4)
- Max. 270 cSt (2,0 ... 75 / Typ RE 4)
- Max. 270 cSt (9,0 ... 300 / Typ RE 4)
- Max. 270 cSt (15,0 ... 300 / Typ RE 4)
- Max. 270 cSt (7,5 ... 100 / Typ RE 6)
- Max. 270 cSt (16,0 ... 600 / Typ RE 6)
- Max. 270 cSt (25,0 ... 600 / Typ RE 6)
|
流量計測量粘度 |
10 to 500 mm2 s-1 (cSt) |
| 礦物油，HFA和HFC液體，Skydrol，水等等 |
被測介質 |
礦物油，柴油機油，脂肪等等 |
AlZnMgCu 1,5 (3.4365),
或X10CrNiS189 (1.4305), passivised |
流量計外殼材料 |
X10CrNiS189 (1.4305)
GGG60 (0.7060)
16MnCr5 (1.7131) |
400 bar (40,0 MPa) (1,0 ... 10 l/min)
400 bar (40,0 MPa) (2,0 ... 75 l/min)
400 bar (40,0 MPa) (9,0 ... 300 l/min)
350 bar (35,0 MPa) (16,0 ... 600 l/min) |
最大工作壓力pmax |
400 bar (40,0 MPa) (0,005 ... 1l/min)
630 bar (63,0 MPa) (0,05 ... 5l/min)
630 bar (63,0 MPa) (0,2 ... 30l/min)
400 bar (40,0 MPa) (0,7 ... 70l/min)
400 bar (40,0 MPa) (3,0 ... 300l/min) |
±1,0 % o. MV (1,0 ... 10 l/min)
±0,5 % o. MV(2,0 ... 75 l/min)
±0,5 % o. MV (9,0 ... 300 l/min)
±0,5 % o. MV(16,0 ... 600 l/min) |
流量計精度 |
±0,5 % o. MV (0,005 ... 1l/min)
±0,5 % o. MV (0,05 ... 5l/min)
±0,5 % o. MV (0,2 ... 30l/min)
±0,4 % o. MV (0,7 ... 70l/min)
±0,5 % o. MV (3,0 ... 300l/min) |
50 μm (1,0 ... 10 l/min)
50 μm(2,0 ... 75 l/min)
50 μm (9,0 ... 300 l/min)
50 μm (16,0 ... 600 l/min) |
流量計前端過濾器要求精度 |
10μm(0,005 ... 1l/min)
10 μm (0,05 ... 5l/min)
25 μm(0,2 ... 30l/min)
25 μm (0,7 ... 70l/min)
25 μm (3,0 ... 300l/min) |
