美国女人做爰全过程免费,亚洲艳情,五月综合激情网,欧美交换配乱婬粗大嫩模,纣王h文h啪肉np文,日韩三级视频在线观看,bdsm性摧虐鞭打,欧美少妇日肥b

Test Points 1604

Hydrotechnik in china

Test Points 1604 for use

◆The original and still the market leader, MINIMESS® 1604 pressure test points offer the most advanced sealing system available.

◆ A lifetime leak free guarantee and suitability for almost any fluid or gas makes MINIMESS® the natural choice to specify.

◆A user list throughout the world reads as a who of industry from mobile plant to steel and gas production.

◆ MINIMESS® 1604 or ‘Test 20’ is the most commonly used test point across all industries.The wide range of choice in materials and threads make this the most commonly used test point.

◆ Max. working pressure 63 MPa (630 bar) according to ISO 15171-2 .

◆Material
Coupling body and metal cap made of steel 1.0718
Note: Unless stated otherwise, all products shown in this catalogueare made of free-cutting steel 1.0718

◆Sealing
Internal primary- and secondary sealing as well as sealing for screw-in threads are made of NBR (Perbunan). Option in FKM (Viton).

◆ Vibration
NBR (Perbunan) and/or FKM (Viton) O-ring to prevent cap loosening due to vibration.

◆Screw-in thread Large range of threads are available.

◆ Media application
Suitable for hydraulic- and other oils on mineral oil basis

◆Temperature ranges at applications with metal cap (standard)
Sealing made of NBR (Perbunan): -25 °C to +100 °C,for a short time, can be also used up to +120 °C
Sealing made of FKM (Viton) as option: -20 °C to +200 °C
Application with plastic cap (option) and for both sealing materials: -20 °C to +100 °C
Application for low temperature: -54 °C on request

Hydrotechnik MINIMESS® 1604 Test Point

		Tor-que Nm	Technical data				Material: Free cutting steel 1.0718	Material: Stainless steel 1.4571
			Technical data
Thread G	Type of seal A		p max	H mm	i mm	SW mm	with NBR -sealing	with NBR -sealing
M 10 x 1	Form G	12	40 MPa	43	8,5	17	2106-01-33.00	on request
M 14 x 1,5	Form F	40	40 MPa	40	10	19	2106-01-14.00	on request
ISO 228-G 1/4	Form F	40	40 MPa	40	10	19	2106-01-18.00	2706-01-18.10

Form C

Form G

Form H

Thread port according to DIN 3852 part 1 and part 2, form Z (sealed with suitable sealant)

Thread Port according to HYDROTECHNIK standard N901-01-14 (sealed with O-ring)

Thread Port according to ANSI/ASME B 1.20.1-1983 (self sealing thread)

G	b	t
ISO 7 / I - R1/8	5,5	9,5
ISO 7 / I - R1/4	8,5	13,5

G	d	b	t
M 8 x 1	9,5	9,0	13,0
M 10 x 1	11,5	9,0	13,0

G	b
1/8 NPTF	12,0
1/4 NPTF	17,5
1/2 NPTF	22,9

Form E

Form F / B

Thread port according to SAEJ 514 (UNF) or according to ISO 6149-1 (sealed with O-ring)

Thread Port up to Ø d according to DIN 3852 part 1 and part 2, from X (sealed with flat seal or sealing edge)

SAE J 514 (UNF)
G	d1	d2	b	k	t	a	z°
7/16-20 UNF	21,0	12,4	11,5	2,4	14,0	1,6	12,0
1/2-20 UNF	23,0	14,0	11,5	2,4	14,0	1,6	12,0
9/16-18 UNF	25,0	15,6	12,7	2,5	15,5	1,6	12,0
3/4-16 UNF	30,0	20,6	14,3	2,5	17,5	2,4	15,0

ISO 6149-1
M 10 x 1	19,0	11,1	10,0	1,6	11,5	1,0	12,0
M 12 x 1,5	19,0	13,8	11,5	2,4	14,0	1,5	15,0
M 14 x 1,5	21,0	15,8	11,5	2,4	14,0	1,5	15,0
M 16 x 1,5	24,0	17,8	13,0	2,4	15,5	1,5	15,0

G	d	a	b	t
ISO 228-G 1/8	15,0	1,0	8,0	13,0
ISO 228-G 1/4	20,0	1,5	12,0	18,5
ISO 228-G 3/8	23,0	2,0	12,0	18,5
ISO 228-G 1/2	27,0	2,5	14,0	22,0
M 12 x 1,5	18,0	1,5	12,0	18,5
M 14 x 1,5	20,0	1,5	12,0	18,5
M 16 x 1,5	22,0	1,5	12,0	18,5

ShangHai ZhongYe Measurement & Control Technology Co.,Ltd.				Hydrotechnik
Tel:086-021-67157680	Fax:086-021-57157435	滬ICP備09068850號-4	E-Mail:[email protected]	Test Points

Hydrotechnik MINIMESS® 1604 Test Point

Test point 1620/1215/1604/1615←HYDROTECHNIK

hydrotechnik

Test Points 1604 for use

Hydrotechnik MINIMESS® 1604 Test Point