Hydrotechnik MINIMESS® 1620 Test Point
Test point 1620/1215/1604/1615←HYDROTECHNIK
 |
 |
 |
 |
 |
 |
hydrotechnik
Hydrotechnik MINIMESS® 1620 Test Point Introduction
 |
Test Points 1620 |
| Hydrotechnik in china | |
| Test point 1620 download | |
Test Points 1620 for use |
|
| ◆ The original and still the market leader, MINIMESS® 1620 pressure test points offer the most advanced sealing system available. | |
| ◆ A lifetime leak free guarantee and suitability for almost any fluid or gas makes MINIMESS® the natural choice to specify. | |
| ◆ A user list throughout the world reads as a who’s who of industry from mobile plant to steel and gas production. | |
| ◆ MINIMESS® 1620 or ‘Test 20’ is the most commonly used test point across all industries.The wide range of choice in materials and threads make this the most commonly used test point. | |
| ◆ Max. working pressure 63 MPa (630 bar) according to ISO 15171-2 . | |
◆ Material |
|
| ◆ Sealing Internal primary- and secondary sealing as well as sealing for screw-in threads are made of NBR (Perbunan). Option in FKM (Viton). |
|
| ◆ Vibration NBR (Perbunan) and/or FKM (Viton) O-ring to prevent cap loosening due to vibration. |
|
| ◆ Screw-in thread Large range of threads are available. | |
| ◆ Media application Suitable for hydraulic- and other oils on mineral oil basis |
|
| ◆ Temperature ranges at applications with metal cap (standard) Sealing made of NBR (Perbunan): -25 °C to +100 °C,for a short time, can be also used up to +120 °C Sealing made of FKM (Viton) as option: -20 °C to +200 °C Application with plastic cap (option) and for both sealing materials: -20 °C to +100 °C Application for low temperature: -54 °C on request |
|
Hydrotechnik MINIMESS® 1620 Test Point Technical data and Part-NO.
 |
Tor-que Nm |
Technical data | Material: |
Material: |
Material: Stainless steel 1.4571 |
||||
 |
 |
|
|||||||
| Thread G | Type of seal A |
p max | H mm |
i mm |
SW mm |
with NBR -sealing | with NBR -sealing | with FKM -sealing | |
| M 8 x 1 | Form G | 6 | 25 MPa | 41 | 8,5 | 17 | 2103-01-32.00 | 2103-30-32.00 | on request |
| M 10 x 1 | Form G | 12 | 63 MPa | 37,5 | 8,5 | 17 | 2103-01-33.00 | 2103-30-33.00 | 2703-01-33.10 |
| M 12 x 1,5 | Form F | 30 | 63 MPa | 36 | 10 | 17 | 2103-01-13.00 | 2103-30-13.00 | on request |
| M 14 x 1,5 | Form F | 40 | 63 MPa | 36 | 10 | 19 | 2103-01-14.00 | 2103-30-14.00 | 2703-01-14.10 |
| M 16 x 1,5 | Form F | 60 | 63 MPa | 36 | 10 | 22 | 2103-01-15.00 | 2103-30-15.00 | on request |
| M 14 x 1,5 | Form E | 45 | 63 MPa | 35,5 | 11 | 19 | 2103-01-96.00 | 2103-30-96.00 | on request |
| ISO 228-G 1/8 | Form F | 18 | 40 MPa | 38 | 8 | 17 | 2103-01-17.00 | 2103-30-17.00 | 2703-01-17.10 |
| ISO 228-G 1/4 | Form F | 40 | 63 MPa | 36 | 10 | 19 | 2103-01-18.00 | 2103-30-18.00 | 2703-01-18.10 |
| ISO 228-G 3/8 | Form F | 60 | 63 MPa | 36 | 10 | 22 | 2103-01-16.00 | 2103-30-16.00 | on request |
| 1/8 NPTF | Form H | – | 40 MPa | 33 | 9,5 | 17 | 2103-01-46.00 | 2103-30-46.00 | on request |
| 1/4 NPTF | Form H | – | 63 MPa | 33 | 16,5 | 17 | 2103-01-47.00 | 2103-30-47.00 | 2703-01-47.10 |
| 7/16-20 UNF | Form E | 20 | 63 MPa | 37 | 9 | 17 | 2103-01-21.00 | 2103-30-21.00 | on request |
| 9/16-18 UNF | Form E | 35 | 63 MPa | 36 | 10 | 19 | 2103-01-53.00 | 2103-30-53.00 | on request |
| ISO 7/I-R 1/8 | Form C | – | 40MPa | 33 | 13 | 17 | 2103-01-40.00 | 2103-30-40.00 | on request |
| ISO 7/I-R 1/4 | Form C | – | 63 MPa | 33 | 13 | 17 | 2103-01-41.00 | 2103-30-41.00 | on request |
Hydrotechnik MINIMESS® 1620 Test Point Type of seal A
| Form C | Form G | Form H | ||||||||||||||||||||||||||||||||||||
 |
 |
 |
||||||||||||||||||||||||||||||||||||
| Thread port according to DIN 3852 part 1 and part 2, form Z (sealed with suitable sealant) | Thread Port according to HYDROTECHNIK standard N901-01-14 (sealed with O-ring) | Thread Port according to ANSI/ASME B 1.20.1-1983 (self sealing thread) | ||||||||||||||||||||||||||||||||||||
|
|
|
| Form E | Form F / B | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Thread port according to SAEJ 514 (UNF) or according to ISO 6149-1 (sealed with O-ring) | Thread Port up to Ø d according to DIN 3852 part 1 and part 2, from X (sealed with flat seal or sealing edge) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||